processconvert
Salts & brines

Ammonium sulfate · (NH4)2SO4

Ammonium sulfate ((NH4)2SO4) is a salt; this page gives computed density and dynamic viscosity for aqueous solutions from 2–40 wt% and 15–55 °C.

Values are computed from the Laliberté (2009) aqueous-electrolyte correlation and tabulated over 240 wt% and 1555 °C.

Also known as
Sulfate of ammonia, AMS, Diammonium sulfate
CAS number
7783-20-2
Tabulated range
240 wt% · 1555 °C
Properties
Density · Dynamic viscosity · Specific gravity
At 20 wt% · 20 °C
reference snapshot
Density
1114.8kg/m³
Density
1.1148g/cm³
Specific gravity
1.117
Viscosity
1.441cP
Explore

Read a value at any point

Move the sliders to interpolate between the tabulated grid points. The readout and chart never go outside the validated 240 wt% and 1555 °C range, and every number is interpolated from the committed table below — nothing is computed from a chemistry model in your browser.

Interactive explorer

Values are interpolated between the tabulated grid points below — sliders stay within the validated 240 wt% and 1555 °C range.

21 wt%
20 °C
Density
1120.6 kg/m³
Density
1.1206 g/cm³
Specific gravity
1.123
Dynamic viscosity
1.475 cP
Density (kg/m³) vs wt% (NH4)2SO4 at 20 °C — Ammonium sulfate.
Why it matters

What the numbers tell you

At 20 wt% and 20 °C, aqueous ammonium sulfate has a density of about 1115 kg/m³ (1.115 g/cm³) — roughly 1.12× the density of water. It also has a dynamic viscosity of about 1.441 cP, against roughly 1 cP for water at the same temperature. Those differences carry straight into volume-to-mass conversions, pump and pipe sizing.

Common grades

A few working strengths

Properties at 20 °C for a handful of concentrations in everyday use, read from the committed grid (interpolated between tabulated points where a grade falls between them). The full table follows below.

wt% (NH4)2SO4°CDensity kg/m³SGViscosity cP
10201056.91.0591.186
20201114.81.1171.441
30201172.21.1741.868
40201228.81.2312.588
Sources

Where the numbers come from

Every value on this page is computed by a deterministic model — none is entered by hand. The generating method and the references it is checked against:

  • Laliberte, M. (2009). A Model for Calculating the Heat Capacity of Aqueous Solutions, with Updated Density and Viscosity Data. J. Chem. Eng. Data 54(6), 1725-1760. doi:10.1021/je8008123
  • CRC Handbook of Chemistry and Physics, 97th ed. (Haynes, ed., 2016) - Concentrative Properties of Aqueous Solutions (density and viscosity at 20 degC)
  • CRC Handbook of Chemistry and Physics - Aqueous Solubility of Inorganic Compounds at Various Temperatures (solubility bounds for the tabulated range)

Model: thermo==0.4.0 (chemicals==1.3.0) - Laliberte 2009 electrolyte correlation · Generated 2026-06-07

The committed data file for this page is published as JSON on GitHub under CC BY 4.0.

Validation

Checked against a cited value

The model is cross-checked at one independently cited reference point. The page is published only because this check passes.

Property / pointDensity · 20 wt% · 20 °C
Cited reference value1115.4 kg/m3
Model computed1114.85 kg/m3
Error vs reference0.049% (tolerance 1%)

CRC Handbook of Chemistry and Physics, 97th ed.. Haynes, W.M. (ed.), CRC Handbook of Chemistry and Physics, 97th ed. (CRC Press, 2016), Concentrative Properties of Aqueous Solutions, p. 5-119: 20.0 mass % (NH4)2SO4 at 20 degC = 1.1154 g/cm3. Perry's Chemical Engineers' Handbook, 7th ed. (Table 2-38 Ammonium Sulfate) tabulates the identical value at 20 wt%, 20 degC.

Full tables

Every tabulated point

Rows are temperature (°C); columns are concentration (wt% (NH4)2SO4). Read the cell at the intersection. Specific gravity is density divided by the model water reference of 998.2 kg/m³ at 20 °C.

Density kg/m³
°C \ wt%246810121416182022242628303234363840
151010.91022.71034.51046.31058.01069.71081.31092.91104.51116.11127.61139.11150.61162.01173.41184.81196.11207.51218.71230.0
201010.01021.71033.51045.21056.91068.51080.11091.71103.31114.81126.41137.91149.31160.81172.21183.61194.91206.21217.51228.8
251008.81020.51032.21043.81055.51067.11078.71090.31101.81113.41124.91136.41147.81159.31170.71182.11193.51204.81216.21227.5
301007.31019.01030.61042.31053.91065.51077.01088.61100.11111.71123.21134.61146.11157.61169.01180.41191.81203.21214.61225.9
351005.71017.31028.91040.51052.11063.61075.21086.71098.21109.71121.21132.71144.21155.71167.11178.61190.01201.41212.81224.2
401003.81015.41026.91038.51050.11061.61073.11084.61096.11107.61119.11130.61142.11153.61165.11176.51188.01199.51210.91222.4
451001.81013.31024.81036.31047.91059.41070.91082.41093.91105.41116.91128.41139.91151.41162.91174.41185.91197.41208.91220.4
50999.51011.01022.51034.01045.51057.01068.51080.01091.51103.01114.51126.01137.51149.01160.51172.11183.61195.21206.71218.3
55997.11008.61020.11031.51043.01054.51065.91077.41088.91100.41111.91123.41135.01146.51158.11169.61181.21192.81204.41216.1
Dynamic viscosity cP (mPa·s)
°C \ wt%246810121416182022242628303234363840
151.1751.2141.2531.2951.3381.3851.4351.4901.5501.6161.6891.7721.8651.9692.0862.2172.3642.5252.7012.892
201.0361.0711.1081.1461.1861.2301.2761.3261.3811.4411.5091.5841.6681.7621.8681.9862.1182.2622.4192.588
250.9220.9540.9881.0231.0611.1011.1441.1901.2411.2961.3581.4271.5041.5901.6861.7931.9122.0412.1822.333
300.8260.8560.8880.9210.9560.9931.0331.0761.1231.1741.2311.2951.3651.4441.5321.6301.7371.8551.9822.118
350.7460.7740.8040.8340.8670.9020.9390.9791.0231.0711.1231.1821.2471.3201.4011.4901.5891.6961.8121.935
400.6780.7040.7320.7610.7910.8240.8580.8960.9370.9811.0311.0851.1461.2131.2881.3701.4611.5591.6651.777
450.6200.6440.6700.6970.7260.7560.7890.8240.8630.9040.9501.0011.0581.1201.1901.2661.3501.4401.5371.640
500.5690.5920.6170.6420.6690.6980.7290.7620.7980.8370.8800.9280.9811.0391.1041.1751.2521.3361.4261.520
550.5250.5470.5700.5940.6200.6470.6760.7070.7410.7780.8190.8640.9130.9681.0281.0951.1671.2451.3281.415
Typical values

Ammonium sulfate solution properties at 25 °C

At 25 °C, 10 wt% ammonium sulfate has a density of about 1055.5 kg/m³ and a dynamic viscosity of about 1.061 cP. At 25 °C, 30 wt% ammonium sulfate has a density of about 1170.7 kg/m³ and a dynamic viscosity of about 1.686 cP. At 25 °C, 40 wt% ammonium sulfate has a density of about 1227.5 kg/m³ and a dynamic viscosity of about 2.333 cP.

Limitations

Before you use these numbers

  • Laliberte (2009) aqueous-electrolyte correlation for (NH4)2SO4-water, density and viscosity only: the published data set behind the correlation carries no heat-capacity coefficients for ammonium sulfate, so heat capacity is not tabulated rather than approximated. Tabulated for 2-40 wt% over 15-55 degC; saturation is nearly flat with temperature at about 42-44 wt%, so the whole table sits below saturation. Values are for preliminary design; verify against vendor data for critical service.
  • Values are tabulated only inside the 240 wt% and 1555 °C ranges shown; the correlation is not extrapolated beyond them here.
  • Figures are for a pure ammonium sulfate–water system. Commercial grades contain impurities (for example chloride in some caustic grades) that shift density and viscosity; check the supplier's data sheet for a specific product.
  • Use for preliminary design; verify for critical service.
← All substances

Built and reviewed by a practising process engineer. About ProcessConvert →