m²tocm²

1 m² equals 10000 cm². To convert, multiply the value in square metres (permeability) by 10000.

1 m² = 10000 cm². For any value, multiply by 10000.

Divide by the same factor — or equivalently, multiply by 0.0001. So 1 cm² = 0.0001 m².

Permeability conversions between m² and cm² appear in petroleum and reservoir engineering, hydrogeology, geotechnical engineering, packed-bed filtration and porous-materials research. The darcy (D) and its sub-multiples (mD, µD, nD) dominate petroleum-engineering documentation; SI area-equivalent units (m², µm², mm², cm², ft²) appear in geophysics and porous-media research. Intrinsic permeability is a property of the porous medium alone — this category does NOT include hydraulic conductivity (m/s, requires fluid density and viscosity), gas permeability (Klinkenberg slip corrections) or membrane-permeability coefficients, all of which are different physical quantities and require explicit assumptions.

The factor shown is precise to at least 7 significant figures. For most process-engineering work this is far better than instrument accuracy. For metrology or trade applications, refer to the relevant national standard (NIST, BIPM, ISO 80000).