▸ processconvert
Permeability

nDtomD

Convert nanodarcy (nD) to millidarcy (mD).

Factor1 nD = 1e-6 mD

Converter

nD

Accepts numbers or expressions, e.g. 150 + 14.7

Result
1mD

Rendered to 6 significant figures.

Formula

Formula
mD = nD × 1e-6

Multiply any value in nanodarcy by 1e-6 to obtain the value in millidarcy.

Worked example

Convert 1.00000e+6 nD to mD.

  1. 01Start with 1.00000e+6 nD.
  2. 02Multiply by the conversion factor: 1.00000e+6 × 1e-6 = 1 mD.
Result1.00000e+6 nD = 1 mD

Conversion table

nDmD
11e-6
22e-6
55e-6
101e-5
202e-5
505e-5
1001e-4
2000.0002
5000.0005
10000.001

Reference values rounded to 5 significant figures for display.

FAQ

What is the conversion factor from nD to mD?
1 nD equals 1e-6 mD. To convert, multiply the value in nanodarcy by 1e-6.
How do I convert 1 nD to mD?
1 nD = 1e-6 mD. For any value, multiply by 1e-6.
How do I convert mD back to nD?
Divide by the same factor — or equivalently, multiply by 1000000. So 1 mD = 1.00000e+6 nD.
When would I need to convert nanodarcy to millidarcy?
Permeability conversions between nD and mD appear in petroleum and reservoir engineering, hydrogeology, geotechnical engineering, packed-bed filtration and porous-materials research. The darcy (D) and its sub-multiples (mD, µD, nD) dominate petroleum-engineering documentation; SI area-equivalent units (m², µm², mm², cm², ft²) appear in geophysics and porous-media research. Intrinsic permeability is a property of the porous medium alone — this category does NOT include hydraulic conductivity (m/s, requires fluid density and viscosity), gas permeability (Klinkenberg slip corrections) or membrane-permeability coefficients, all of which are different physical quantities and require explicit assumptions.
Is the conversion exact?
The factor shown is precise to at least 7 significant figures. For most process-engineering work this is far better than instrument accuracy. For metrology or trade applications, refer to the relevant national standard (NIST, BIPM, ISO 80000).

Related conversions