▸ processconvert
Permeability

m²tomD

Convert square metres (permeability) (m²) to millidarcy (mD).

Factor1 m² = 1.01325e+15 mD

Converter

m²

Accepts numbers or expressions, e.g. 150 + 14.7

Result
1.01325e+15mD

Rendered to 6 significant figures.

Formula

Formula
mD = m² × 1.01325e+15

Multiply any value in square metres (permeability) by 1.01325e+15 to obtain the value in millidarcy.

Worked example

Convert 1 m² to mD.

  1. 01Start with 1 m².
  2. 02Multiply by the conversion factor: 1 × 1.01325e+15 = 1.01325e+15 mD.
Result1 m² = 1.01325e+15 mD

Conversion table

m²mD
11.0132e+15
22.0265e+15
55.0662e+15
101.0132e+16
202.0265e+16
505.0662e+16
1001.0132e+17
2002.0265e+17
5005.0662e+17
10001.0132e+18

Reference values rounded to 5 significant figures for display.

FAQ

What is the conversion factor from m² to mD?
1 m² equals 1.01325e+15 mD. To convert, multiply the value in square metres (permeability) by 1.01325e+15.
How do I convert 1 m² to mD?
1 m² = 1.01325e+15 mD. For any value, multiply by 1.01325e+15.
How do I convert mD back to m²?
Divide by the same factor — or equivalently, multiply by 9.869233e-16. So 1 mD = 9.86923e-16 m².
When would I need to convert square metre (permeability) to millidarcy?
Permeability conversions between m² and mD appear in petroleum and reservoir engineering, hydrogeology, geotechnical engineering, packed-bed filtration and porous-materials research. The darcy (D) and its sub-multiples (mD, µD, nD) dominate petroleum-engineering documentation; SI area-equivalent units (m², µm², mm², cm², ft²) appear in geophysics and porous-media research. Intrinsic permeability is a property of the porous medium alone — this category does NOT include hydraulic conductivity (m/s, requires fluid density and viscosity), gas permeability (Klinkenberg slip corrections) or membrane-permeability coefficients, all of which are different physical quantities and require explicit assumptions.
Is the conversion exact?
The factor shown is precise to at least 7 significant figures. For most process-engineering work this is far better than instrument accuracy. For metrology or trade applications, refer to the relevant national standard (NIST, BIPM, ISO 80000).

Related conversions