Frequency
cycles/mintocycles/hr
Convert cycles per minute (cycles/min) to cycles per hour (cycles/hr).
Factor1 cycles/min = 60 cycles/hr
Converter
cycles/min
Accepts numbers or expressions, e.g. 150 + 14.7
Result
cycles/hr
Rendered to 6 significant figures.
Formula
Formula
cycles/hr = cycles/min × 60
Multiply any value in cycles per minute by 60 to obtain the value in cycles per hour.
Worked example
Convert 10 cycles/min to cycles/hr.
- 01Start with 10 cycles/min.
- 02Multiply by the conversion factor: 10 × 60 = 600 cycles/hr.
Result10 cycles/min = 600 cycles/hr
Conversion table
| cycles/min | cycles/hr |
|---|---|
| 1 | 60 |
| 2 | 120 |
| 5 | 300 |
| 10 | 600 |
| 20 | 1200 |
| 50 | 3000 |
| 100 | 6000 |
| 200 | 12000 |
| 500 | 30000 |
| 1000 | 60000 |
Reference values rounded to 5 significant figures for display.
FAQ
What is the conversion factor from cycles/min to cycles/hr?
1 cycles/min equals 60 cycles/hr. To convert, multiply the value in cycles per minute by 60.
How do I convert 1 cycles/min to cycles/hr?
1 cycles/min = 60 cycles/hr. For any value, multiply by 60.
How do I convert cycles/hr back to cycles/min?
Divide by the same factor — or equivalently, multiply by 0.01666667. So 1 cycles/hr = 0.0166667 cycles/min.
When would I need to convert cycle per minute to cycle per hour?
Frequency conversions between cycles/min and cycles/hr are needed in signal and RF engineering, motor and turbomachinery rotational-speed work, vibration and pulse-rate analysis, and control-loop sample-rate specification. Hz dominates electronics and instrumentation; kHz, MHz and GHz cover audio through microwave; rpm and rps dominate mechanical rotational equipment; cycles per minute, second and hour cover slow industrial cyclic processes. Angular frequency (rad/s) and time-period (Hz ↔ seconds) conversions are NOT included — they require either a 2π factor or a reciprocal relationship.
Is the conversion exact?
The factor shown is precise to at least 7 significant figures. For most process-engineering work this is far better than instrument accuracy. For metrology or trade applications, refer to the relevant national standard (NIST, BIPM, ISO 80000).