Volumetric Flux
m/daytom³/m²/s
Convert metres per day (volumetric flux) (m/day) to cubic metres per square metre per second (m³/m²/s).
Factor1 m/day = 1.157407e-5 m³/m²/s
Converter
m/day
Accepts numbers or expressions, e.g. 150 + 14.7
Result
m³/m²/s
Rendered to 6 significant figures.
Formula
Formula
m³/m²/s = m/day × 1.157407e-5
Multiply any value in metres per day (volumetric flux) by 1.157407e-5 to obtain the value in cubic metres per square metre per second.
Worked example
Convert 86400 m/day to m³/m²/s.
- 01Start with 86400 m/day.
- 02Multiply by the conversion factor: 86400 × 1.157407e-5 = 1 m³/m²/s.
Result86400 m/day = 1 m³/m²/s
Conversion table
| m/day | m³/m²/s |
|---|---|
| 1 | 1.1574e-5 |
| 2 | 2.3148e-5 |
| 5 | 5.787e-5 |
| 10 | 0.00011574 |
| 20 | 0.00023148 |
| 50 | 0.0005787 |
| 100 | 0.0011574 |
| 200 | 0.0023148 |
| 500 | 0.005787 |
| 1000 | 0.011574 |
Reference values rounded to 5 significant figures for display.
FAQ
What is the conversion factor from m/day to m³/m²/s?
1 m/day equals 1.157407e-5 m³/m²/s. To convert, multiply the value in metres per day (volumetric flux) by 1.157407e-5.
How do I convert 1 m/day to m³/m²/s?
1 m/day = 1.15741e-5 m³/m²/s. For any value, multiply by 1.157407e-5.
How do I convert m³/m²/s back to m/day?
Divide by the same factor — or equivalently, multiply by 86400. So 1 m³/m²/s = 86400 m/day.
When would I need to convert metre per day (volumetric flux) to cubic metre per square metre per second?
Volumetric-flux conversions between m/day and m³/m²/s are routine in membrane filtration (RO, UF, MF, NF permeate flux), hydraulic loading specification, water-treatment design, hydrometallurgy and packed-bed column loading, and environmental engineering. LMH (L/m²/h) and gfd (gal/ft²/day) dominate membrane datasheets; m³/m²/h and m³/m²/day cover SI engineering ladders; m/day and cm/s appear as superficial velocity in hydromet and packed-bed work. Volumetric flux is the same physical quantity as superficial velocity (m³/m²/s ≡ m/s) but is kept distinct from the velocity and flow categories because the engineering intent is volumetric throughput per unit area, not bulk motion or total throughput.
Is the conversion exact?
The factor shown is precise to at least 7 significant figures. For most process-engineering work this is far better than instrument accuracy. For metrology or trade applications, refer to the relevant national standard (NIST, BIPM, ISO 80000).
Related conversions
- m³/m²/s → m/daycubic metre per square metre per second → metre per day (volumetric flux)
- m/s → m³/m²/smetre per second (volumetric flux) → cubic metre per square metre per second
- m³/m²/s → m/scubic metre per square metre per second → metre per second (volumetric flux)
- m/s → m/daymetre per second (volumetric flux) → metre per day (volumetric flux)
- m/day → m/smetre per day (volumetric flux) → metre per second (volumetric flux)
- m³/m²/s → m³/m²/hcubic metre per square metre per second → cubic metre per square metre per hour