▸ processconvert
Volumetric Flux

m³/m²/htocm/hr

Convert cubic metres per square metre per hour (m³/m²/h) to centimetres per hour (volumetric flux) (cm/hr).

Factor1 m³/m²/h = 100 cm/hr

Converter

m³/m²/h

Accepts numbers or expressions, e.g. 150 + 14.7

Result
100cm/hr

Rendered to 6 significant figures.

Formula

Formula
cm/hr = m³/m²/h × 100

Multiply any value in cubic metres per square metre per hour by 100 to obtain the value in centimetres per hour (volumetric flux).

Worked example

Convert 1 m³/m²/h to cm/hr.

  1. 01Start with 1 m³/m²/h.
  2. 02Multiply by the conversion factor: 1 × 100 = 100 cm/hr.
Result1 m³/m²/h = 100 cm/hr

Conversion table

m³/m²/hcm/hr
1100
2200
5500
101000
202000
505000
10010000
20020000
50050000
10001.0000e+5

Reference values rounded to 5 significant figures for display.

FAQ

What is the conversion factor from m³/m²/h to cm/hr?
1 m³/m²/h equals 100 cm/hr. To convert, multiply the value in cubic metres per square metre per hour by 100.
How do I convert 1 m³/m²/h to cm/hr?
1 m³/m²/h = 100 cm/hr. For any value, multiply by 100.
How do I convert cm/hr back to m³/m²/h?
Divide by the same factor — or equivalently, multiply by 0.01. So 1 cm/hr = 0.01 m³/m²/h.
When would I need to convert cubic metre per square metre per hour to centimetre per hour (volumetric flux)?
Volumetric-flux conversions between m³/m²/h and cm/hr are routine in membrane filtration (RO, UF, MF, NF permeate flux), hydraulic loading specification, water-treatment design, hydrometallurgy and packed-bed column loading, and environmental engineering. LMH (L/m²/h) and gfd (gal/ft²/day) dominate membrane datasheets; m³/m²/h and m³/m²/day cover SI engineering ladders; m/day and cm/s appear as superficial velocity in hydromet and packed-bed work. Volumetric flux is the same physical quantity as superficial velocity (m³/m²/s ≡ m/s) but is kept distinct from the velocity and flow categories because the engineering intent is volumetric throughput per unit area, not bulk motion or total throughput.
Is the conversion exact?
The factor shown is precise to at least 7 significant figures. For most process-engineering work this is far better than instrument accuracy. For metrology or trade applications, refer to the relevant national standard (NIST, BIPM, ISO 80000).

Related conversions