▸ processconvert
Volumetric Flux

L/(min·m²)tocm/hr

Convert litres per minute per square metre (volumetric flux) (L/(min·m²)) to centimetres per hour (volumetric flux) (cm/hr).

Factor1 L/(min·m²) = 6 cm/hr

Converter

L/(min·m²)

Accepts numbers or expressions, e.g. 150 + 14.7

Result
6cm/hr

Rendered to 6 significant figures.

Formula

Formula
cm/hr = L/(min·m²) × 6

Multiply any value in litres per minute per square metre (volumetric flux) by 6 to obtain the value in centimetres per hour (volumetric flux).

Worked example

Convert 1 L/(min·m²) to cm/hr.

  1. 01Start with 1 L/(min·m²).
  2. 02Multiply by the conversion factor: 1 × 6 = 6 cm/hr.
Result1 L/(min·m²) = 6 cm/hr

Conversion table

L/(min·m²)cm/hr
16
212
530
1060
20120
50300
100600
2001200
5003000
10006000

Reference values rounded to 5 significant figures for display.

FAQ

What is the conversion factor from L/(min·m²) to cm/hr?
1 L/(min·m²) equals 6 cm/hr. To convert, multiply the value in litres per minute per square metre (volumetric flux) by 6.
How do I convert 1 L/(min·m²) to cm/hr?
1 L/(min·m²) = 6 cm/hr. For any value, multiply by 6.
How do I convert cm/hr back to L/(min·m²)?
Divide by the same factor — or equivalently, multiply by 0.1666667. So 1 cm/hr = 0.166667 L/(min·m²).
When would I need to convert litre per minute per square metre (volumetric flux) to centimetre per hour (volumetric flux)?
Volumetric-flux conversions between L/(min·m²) and cm/hr are routine in membrane filtration (RO, UF, MF, NF permeate flux), hydraulic loading specification, water-treatment design, hydrometallurgy and packed-bed column loading, and environmental engineering. LMH (L/m²/h) and gfd (gal/ft²/day) dominate membrane datasheets; m³/m²/h and m³/m²/day cover SI engineering ladders; m/day and cm/s appear as superficial velocity in hydromet and packed-bed work. Volumetric flux is the same physical quantity as superficial velocity (m³/m²/s ≡ m/s) but is kept distinct from the velocity and flow categories because the engineering intent is volumetric throughput per unit area, not bulk motion or total throughput.
Is the conversion exact?
The factor shown is precise to at least 7 significant figures. For most process-engineering work this is far better than instrument accuracy. For metrology or trade applications, refer to the relevant national standard (NIST, BIPM, ISO 80000).

Related conversions