▸ processconvert
Thermal Resistance

K/kWto°F·s/BTU

Convert kelvins per kilowatt (K/kW) to Fahrenheit-seconds per British thermal unit (°F·s/BTU).

Factor1 K/kW = 1.899101 °F·s/BTU

Converter

K/kW

Accepts numbers or expressions, e.g. 150 + 14.7

Result
1.8991°F·s/BTU

Rendered to 6 significant figures.

Formula

Formula
°F·s/BTU = K/kW × 1.899101

Multiply any value in kelvins per kilowatt by 1.899101 to obtain the value in Fahrenheit-seconds per British thermal unit.

Worked example

Convert 1 K/kW to °F·s/BTU.

  1. 01Start with 1 K/kW.
  2. 02Multiply by the conversion factor: 1 × 1.899101 = 1.8991 °F·s/BTU.
Result1 K/kW = 1.8991 °F·s/BTU

Conversion table

K/kW°F·s/BTU
11.8991
23.7982
59.4955
1018.991
2037.982
5094.955
100189.91
200379.82
500949.55
10001899.1

Reference values rounded to 5 significant figures for display.

FAQ

What is the conversion factor from K/kW to °F·s/BTU?
1 K/kW equals 1.899101 °F·s/BTU. To convert, multiply the value in kelvins per kilowatt by 1.899101.
How do I convert 1 K/kW to °F·s/BTU?
1 K/kW = 1.8991 °F·s/BTU. For any value, multiply by 1.899101.
How do I convert °F·s/BTU back to K/kW?
Divide by the same factor — or equivalently, multiply by 0.5265651. So 1 °F·s/BTU = 0.526565 K/kW.
When would I need to convert kelvin per kilowatt to Fahrenheit-second per British thermal unit?
Thermal-resistance conversions between K/kW and °F·s/BTU appear in electronics cooling (heat-sink and TIM datasheets), transformer, motor and generator thermal-rise calculations, lumped-element R-C thermal-network modelling, and transient heat-transfer analysis. K/W and °C/W are the SI standard; mK/W and µK/W cover sub-SI heat-sink and TIM datasheet ladders; K/kW and K/MW cover large-equipment and power-plant notation; °F·h/BTU and °F·s/BTU are the US convention. This category is lumped thermal resistance only — it does NOT include area-normalized R-value (m²·K/W), thermal-conductivity inverse with geometry, or U-value calculations, all of which are different physical quantities.
Is the conversion exact?
The factor shown is precise to at least 7 significant figures. For most process-engineering work this is far better than instrument accuracy. For metrology or trade applications, refer to the relevant national standard (NIST, BIPM, ISO 80000).

Related conversions