Surface Tension
µN/mtoN/m
Convert micronewtons per metre (µN/m) to newtons per metre (surface tension) (N/m).
Factor1 µN/m = 1e-6 N/m
Converter
µN/m
Accepts numbers or expressions, e.g. 150 + 14.7
Result
N/m
Rendered to 6 significant figures.
Formula
Formula
N/m = µN/m × 1e-6
Multiply any value in micronewtons per metre by 1e-6 to obtain the value in newtons per metre (surface tension).
Worked example
Convert 1.00000e+6 µN/m to N/m.
- 01Start with 1.00000e+6 µN/m.
- 02Multiply by the conversion factor: 1.00000e+6 × 1e-6 = 1 N/m.
Result1.00000e+6 µN/m = 1 N/m
Conversion table
| µN/m | N/m |
|---|---|
| 1 | 1e-6 |
| 2 | 2e-6 |
| 5 | 5e-6 |
| 10 | 1e-5 |
| 20 | 2e-5 |
| 50 | 5e-5 |
| 100 | 1e-4 |
| 200 | 0.0002 |
| 500 | 0.0005 |
| 1000 | 0.001 |
Reference values rounded to 5 significant figures for display.
FAQ
What is the conversion factor from µN/m to N/m?
1 µN/m equals 1e-6 N/m. To convert, multiply the value in micronewtons per metre by 1e-6.
How do I convert 1 µN/m to N/m?
1 µN/m = 1e-6 N/m. For any value, multiply by 1e-6.
How do I convert N/m back to µN/m?
Divide by the same factor — or equivalently, multiply by 1000000. So 1 N/m = 1.00000e+6 µN/m.
When would I need to convert micronewton per metre to newton per metre (surface tension)?
Surface-tension conversions between µN/m and N/m appear in coatings and wettability work, surfactant and interfacial-tension measurement, foam and emulsion characterisation, and capillary/droplet-engineering datasheets. mN/m, dyn/cm and mJ/m² are exact numerical equivalents — they appear interchangeably across SI, CGS and surface-free-energy notations. lbf/ft and lbf/in are common in US petroleum interfacial-tension datasheets and US coatings documentation. This category does not include temperature-dependent material lookups or capillary/contact-angle calculators.
Is the conversion exact?
The factor shown is precise to at least 7 significant figures. For most process-engineering work this is far better than instrument accuracy. For metrology or trade applications, refer to the relevant national standard (NIST, BIPM, ISO 80000).
Related conversions
- N/m → µN/mnewton per metre (surface tension) → micronewton per metre
- N/m → mN/mnewton per metre (surface tension) → millinewton per metre
- mN/m → N/mmillinewton per metre → newton per metre (surface tension)
- N/m → dyn/cmnewton per metre (surface tension) → dyne per centimetre
- dyn/cm → N/mdyne per centimetre → newton per metre (surface tension)
- N/m → lbf/ftnewton per metre (surface tension) → pound-force per foot (surface tension)