Permeability
µDtoD
Convert microdarcy (µD) to darcy (D).
Factor1 µD = 1e-6 D
Converter
µD
Accepts numbers or expressions, e.g. 150 + 14.7
Result
D
Rendered to 6 significant figures.
Formula
Formula
D = µD × 1e-6
Multiply any value in microdarcy by 1e-6 to obtain the value in darcy.
Worked example
Convert 1.00000e+6 µD to D.
- 01Start with 1.00000e+6 µD.
- 02Multiply by the conversion factor: 1.00000e+6 × 1e-6 = 1 D.
Result1.00000e+6 µD = 1 D
Conversion table
| µD | D |
|---|---|
| 1 | 1e-6 |
| 2 | 2e-6 |
| 5 | 5e-6 |
| 10 | 1e-5 |
| 20 | 2e-5 |
| 50 | 5e-5 |
| 100 | 1e-4 |
| 200 | 0.0002 |
| 500 | 0.0005 |
| 1000 | 0.001 |
Reference values rounded to 5 significant figures for display.
FAQ
What is the conversion factor from µD to D?
1 µD equals 1e-6 D. To convert, multiply the value in microdarcy by 1e-6.
How do I convert 1 µD to D?
1 µD = 1e-6 D. For any value, multiply by 1e-6.
How do I convert D back to µD?
Divide by the same factor — or equivalently, multiply by 1000000. So 1 D = 1.00000e+6 µD.
When would I need to convert microdarcy to darcy?
Permeability conversions between µD and D appear in petroleum and reservoir engineering, hydrogeology, geotechnical engineering, packed-bed filtration and porous-materials research. The darcy (D) and its sub-multiples (mD, µD, nD) dominate petroleum-engineering documentation; SI area-equivalent units (m², µm², mm², cm², ft²) appear in geophysics and porous-media research. Intrinsic permeability is a property of the porous medium alone — this category does NOT include hydraulic conductivity (m/s, requires fluid density and viscosity), gas permeability (Klinkenberg slip corrections) or membrane-permeability coefficients, all of which are different physical quantities and require explicit assumptions.
Is the conversion exact?
The factor shown is precise to at least 7 significant figures. For most process-engineering work this is far better than instrument accuracy. For metrology or trade applications, refer to the relevant national standard (NIST, BIPM, ISO 80000).