mm²toµm²

1 mm² equals 1000000 µm². To convert, multiply the value in square millimetres (permeability) by 1000000.

1 mm² = 1.00000e+6 µm². For any value, multiply by 1000000.

Divide by the same factor — or equivalently, multiply by 1e-6. So 1 µm² = 1e-6 mm².

Permeability conversions between mm² and µm² appear in petroleum and reservoir engineering, hydrogeology, geotechnical engineering, packed-bed filtration and porous-materials research. The darcy (D) and its sub-multiples (mD, µD, nD) dominate petroleum-engineering documentation; SI area-equivalent units (m², µm², mm², cm², ft²) appear in geophysics and porous-media research. Intrinsic permeability is a property of the porous medium alone — this category does NOT include hydraulic conductivity (m/s, requires fluid density and viscosity), gas permeability (Klinkenberg slip corrections) or membrane-permeability coefficients, all of which are different physical quantities and require explicit assumptions.

The factor shown is precise to at least 7 significant figures. For most process-engineering work this is far better than instrument accuracy. For metrology or trade applications, refer to the relevant national standard (NIST, BIPM, ISO 80000).