▸ processconvert
Mass Flow Rate

mg/stolt/hr

Convert milligrams per second (mg/s) to long tons per hour (lt/hr).

Factor1 mg/s = 3.543143e-6 lt/hr

Converter

mg/s

Accepts numbers or expressions, e.g. 150 + 14.7

Result
3.54314lt/hr

Rendered to 6 significant figures.

Formula

Formula
lt/hr = mg/s × 3.543143e-6

Multiply any value in milligrams per second by 3.543143e-6 to obtain the value in long tons per hour.

Worked example

Convert 1.00000e+6 mg/s to lt/hr.

  1. 01Start with 1.00000e+6 mg/s.
  2. 02Multiply by the conversion factor: 1.00000e+6 × 3.543143e-6 = 3.54314 lt/hr.
Result1.00000e+6 mg/s = 3.54314 lt/hr

Conversion table

mg/slt/hr
13.5431e-6
27.0863e-6
51.7716e-5
103.5431e-5
207.0863e-5
500.00017716
1000.00035431
2000.00070863
5000.0017716
10000.0035431

Reference values rounded to 5 significant figures for display.

FAQ

What is the conversion factor from mg/s to lt/hr?
1 mg/s equals 3.543143e-6 lt/hr. To convert, multiply the value in milligrams per second by 3.543143e-6.
How do I convert 1 mg/s to lt/hr?
1 mg/s = 3.54314e-6 lt/hr. For any value, multiply by 3.543143e-6.
How do I convert lt/hr back to mg/s?
Divide by the same factor — or equivalently, multiply by 282235.3. So 1 lt/hr = 282235 mg/s.
When would I need to convert milligram per second to long ton per hour?
Mass flow conversions between mg/s and lt/hr are common in material balances, process stream summaries, bulk solids handling, custody transfer, and equipment sizing where kg/hr, t/hr, lb/hr, and lb/s may all appear in different datasheets or vendor documents.
Is the conversion exact?
The factor shown is precise to at least 7 significant figures. For most process-engineering work this is far better than instrument accuracy. For metrology or trade applications, refer to the relevant national standard (NIST, BIPM, ISO 80000).

Related conversions