processconvert
Frequency

rpmtocycles/min

Convert revolutions per minute (rpm) to cycles per minute (cycles/min).

Factor1 rpm = 1 cycles/min

Converter

rpm

Accepts numbers or expressions, e.g. 150 + 14.7

Result
1800cycles/min

Rendered to 6 significant figures.

Formula

Formula
cycles/min = rpm × 1

Multiply any value in revolutions per minute by 1 to obtain the value in cycles per minute.

Worked example

Convert 1800 rpm to cycles/min.

  1. 01Start with 1800 rpm.
  2. 02Multiply by the conversion factor: 1800 × 1 = 1800 cycles/min.
Result1800 rpm = 1800 cycles/min

Conversion table

rpmcycles/min
11
22
55
1010
2020
5050
100100
200200
500500
10001000

Reference values rounded to 5 significant figures for display.

FAQ

What is the conversion factor from rpm to cycles/min?
1 rpm equals 1 cycles/min. To convert, multiply the value in revolutions per minute by 1.
How do I convert 1 rpm to cycles/min?
1 rpm = 1 cycles/min. For any value, multiply by 1.
How do I convert cycles/min back to rpm?
Divide by the same factor — or equivalently, multiply by 1. So 1 cycles/min = 1 rpm.
When would I need to convert revolution per minute to cycle per minute?
Frequency conversions between rpm and cycles/min are needed in signal and RF engineering, motor and turbomachinery rotational-speed work, vibration and pulse-rate analysis, and control-loop sample-rate specification. Hz dominates electronics and instrumentation; kHz, MHz and GHz cover audio through microwave; rpm and rps dominate mechanical rotational equipment; cycles per minute, second and hour cover slow industrial cyclic processes. Angular frequency (rad/s) and time-period (Hz ↔ seconds) conversions are NOT included — they require either a 2π factor or a reciprocal relationship.
Is the conversion exact?
The factor shown is precise to at least 7 significant figures. For most process-engineering work this is far better than instrument accuracy. For metrology or trade applications, refer to the relevant national standard (NIST, BIPM, ISO 80000).

Related conversions