Frequency
µHztorps
Convert microhertz (µHz) to revolutions per second (rps).
Factor1 µHz = 1e-6 rps
Converter
µHz
Accepts numbers or expressions, e.g. 150 + 14.7
Result
rps
Rendered to 6 significant figures.
Formula
Formula
rps = µHz × 1e-6
Multiply any value in microhertz by 1e-6 to obtain the value in revolutions per second.
Worked example
Convert 1.00000e+6 µHz to rps.
- 01Start with 1.00000e+6 µHz.
- 02Multiply by the conversion factor: 1.00000e+6 × 1e-6 = 1 rps.
Result1.00000e+6 µHz = 1 rps
Conversion table
| µHz | rps |
|---|---|
| 1 | 1e-6 |
| 2 | 2e-6 |
| 5 | 5e-6 |
| 10 | 1e-5 |
| 20 | 2e-5 |
| 50 | 5e-5 |
| 100 | 1e-4 |
| 200 | 0.0002 |
| 500 | 0.0005 |
| 1000 | 0.001 |
Reference values rounded to 5 significant figures for display.
FAQ
What is the conversion factor from µHz to rps?
1 µHz equals 1e-6 rps. To convert, multiply the value in microhertz by 1e-6.
How do I convert 1 µHz to rps?
1 µHz = 1e-6 rps. For any value, multiply by 1e-6.
How do I convert rps back to µHz?
Divide by the same factor — or equivalently, multiply by 1000000. So 1 rps = 1.00000e+6 µHz.
When would I need to convert microhertz to revolution per second?
Frequency conversions between µHz and rps are needed in signal and RF engineering, motor and turbomachinery rotational-speed work, vibration and pulse-rate analysis, and control-loop sample-rate specification. Hz dominates electronics and instrumentation; kHz, MHz and GHz cover audio through microwave; rpm and rps dominate mechanical rotational equipment; cycles per minute, second and hour cover slow industrial cyclic processes. Angular frequency (rad/s) and time-period (Hz ↔ seconds) conversions are NOT included — they require either a 2π factor or a reciprocal relationship.
Is the conversion exact?
The factor shown is precise to at least 7 significant figures. For most process-engineering work this is far better than instrument accuracy. For metrology or trade applications, refer to the relevant national standard (NIST, BIPM, ISO 80000).