Frequency
cycles/stocycles/min
Convert cycles per second (cycles/s) to cycles per minute (cycles/min).
Factor1 cycles/s = 60 cycles/min
Converter
cycles/s
Accepts numbers or expressions, e.g. 150 + 14.7
Result
cycles/min
Rendered to 6 significant figures.
Formula
Formula
cycles/min = cycles/s × 60
Multiply any value in cycles per second by 60 to obtain the value in cycles per minute.
Worked example
Convert 100 cycles/s to cycles/min.
- 01Start with 100 cycles/s.
- 02Multiply by the conversion factor: 100 × 60 = 6000 cycles/min.
Result100 cycles/s = 6000 cycles/min
Conversion table
| cycles/s | cycles/min |
|---|---|
| 1 | 60 |
| 2 | 120 |
| 5 | 300 |
| 10 | 600 |
| 20 | 1200 |
| 50 | 3000 |
| 100 | 6000 |
| 200 | 12000 |
| 500 | 30000 |
| 1000 | 60000 |
Reference values rounded to 5 significant figures for display.
FAQ
What is the conversion factor from cycles/s to cycles/min?
1 cycles/s equals 60 cycles/min. To convert, multiply the value in cycles per second by 60.
How do I convert 1 cycles/s to cycles/min?
1 cycles/s = 60 cycles/min. For any value, multiply by 60.
How do I convert cycles/min back to cycles/s?
Divide by the same factor — or equivalently, multiply by 0.01666667. So 1 cycles/min = 0.0166667 cycles/s.
When would I need to convert cycle per second to cycle per minute?
Frequency conversions between cycles/s and cycles/min are needed in signal and RF engineering, motor and turbomachinery rotational-speed work, vibration and pulse-rate analysis, and control-loop sample-rate specification. Hz dominates electronics and instrumentation; kHz, MHz and GHz cover audio through microwave; rpm and rps dominate mechanical rotational equipment; cycles per minute, second and hour cover slow industrial cyclic processes. Angular frequency (rad/s) and time-period (Hz ↔ seconds) conversions are NOT included — they require either a 2π factor or a reciprocal relationship.
Is the conversion exact?
The factor shown is precise to at least 7 significant figures. For most process-engineering work this is far better than instrument accuracy. For metrology or trade applications, refer to the relevant national standard (NIST, BIPM, ISO 80000).