Frequency
cycles/mintoGHz
Convert cycles per minute (cycles/min) to gigahertz (GHz).
Factor1 cycles/min = 1.666667e-11 GHz
Converter
cycles/min
Accepts numbers or expressions, e.g. 150 + 14.7
Result
GHz
Rendered to 6 significant figures.
Formula
Formula
GHz = cycles/min × 1.666667e-11
Multiply any value in cycles per minute by 1.666667e-11 to obtain the value in gigahertz.
Worked example
Convert 6e+10 cycles/min to GHz.
- 01Start with 6e+10 cycles/min.
- 02Multiply by the conversion factor: 6e+10 × 1.666667e-11 = 1 GHz.
Result6e+10 cycles/min = 1 GHz
Conversion table
| cycles/min | GHz |
|---|---|
| 1 | 1.6667e-11 |
| 2 | 3.3333e-11 |
| 5 | 8.3333e-11 |
| 10 | 1.6667e-10 |
| 20 | 3.3333e-10 |
| 50 | 8.3333e-10 |
| 100 | 1.6667e-9 |
| 200 | 3.3333e-9 |
| 500 | 8.3333e-9 |
| 1000 | 1.6667e-8 |
Reference values rounded to 5 significant figures for display.
FAQ
What is the conversion factor from cycles/min to GHz?
1 cycles/min equals 1.666667e-11 GHz. To convert, multiply the value in cycles per minute by 1.666667e-11.
How do I convert 1 cycles/min to GHz?
1 cycles/min = 1.66667e-11 GHz. For any value, multiply by 1.666667e-11.
How do I convert GHz back to cycles/min?
Divide by the same factor — or equivalently, multiply by 6e+10. So 1 GHz = 6e+10 cycles/min.
When would I need to convert cycle per minute to gigahertz?
Frequency conversions between cycles/min and GHz are needed in signal and RF engineering, motor and turbomachinery rotational-speed work, vibration and pulse-rate analysis, and control-loop sample-rate specification. Hz dominates electronics and instrumentation; kHz, MHz and GHz cover audio through microwave; rpm and rps dominate mechanical rotational equipment; cycles per minute, second and hour cover slow industrial cyclic processes. Angular frequency (rad/s) and time-period (Hz ↔ seconds) conversions are NOT included — they require either a 2π factor or a reciprocal relationship.
Is the conversion exact?
The factor shown is precise to at least 7 significant figures. For most process-engineering work this is far better than instrument accuracy. For metrology or trade applications, refer to the relevant national standard (NIST, BIPM, ISO 80000).