Frequency
cycles/hrtorph
Convert cycles per hour (cycles/hr) to revolutions per hour (rph).
Factor1 cycles/hr = 1 rph
Converter
cycles/hr
Accepts numbers or expressions, e.g. 150 + 14.7
Result
rph
Rendered to 6 significant figures.
Formula
Formula
rph = cycles/hr × 1
Multiply any value in cycles per hour by 1 to obtain the value in revolutions per hour.
Worked example
Convert 60 cycles/hr to rph.
- 01Start with 60 cycles/hr.
- 02Multiply by the conversion factor: 60 × 1 = 60 rph.
Result60 cycles/hr = 60 rph
Conversion table
| cycles/hr | rph |
|---|---|
| 1 | 1 |
| 2 | 2 |
| 5 | 5 |
| 10 | 10 |
| 20 | 20 |
| 50 | 50 |
| 100 | 100 |
| 200 | 200 |
| 500 | 500 |
| 1000 | 1000 |
Reference values rounded to 5 significant figures for display.
FAQ
What is the conversion factor from cycles/hr to rph?
1 cycles/hr equals 1 rph. To convert, multiply the value in cycles per hour by 1.
How do I convert 1 cycles/hr to rph?
1 cycles/hr = 1 rph. For any value, multiply by 1.
How do I convert rph back to cycles/hr?
Divide by the same factor — or equivalently, multiply by 1. So 1 rph = 1 cycles/hr.
When would I need to convert cycle per hour to revolution per hour?
Frequency conversions between cycles/hr and rph are needed in signal and RF engineering, motor and turbomachinery rotational-speed work, vibration and pulse-rate analysis, and control-loop sample-rate specification. Hz dominates electronics and instrumentation; kHz, MHz and GHz cover audio through microwave; rpm and rps dominate mechanical rotational equipment; cycles per minute, second and hour cover slow industrial cyclic processes. Angular frequency (rad/s) and time-period (Hz ↔ seconds) conversions are NOT included — they require either a 2π factor or a reciprocal relationship.
Is the conversion exact?
The factor shown is precise to at least 7 significant figures. For most process-engineering work this is far better than instrument accuracy. For metrology or trade applications, refer to the relevant national standard (NIST, BIPM, ISO 80000).